Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on the Citroen C3

Model: Citroen C3 SX, SY - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

On the C3, the space behind the headlamp is tight, and a small detail can cause condensation, misalignment, or overheating contacts. Before purchasing, confirm which side is out and check the bulb type in the manual, on the optical group, or on the old bulb.

With the engine off and the headlamp cool, open the bonnet and locate the dust cover behind the headlamp: this is the barrier against moisture and dirt, remove it carefully and refit it properly. Disconnect the connector by gripping it, never pulling on the wires, and check for any corrosion.

Release the bulb from its clip (often a metal clip), pull it straight out, and insert the new one respecting the orientation, without touching the glass. Reconnect the connector until it clicks, perform a test to check the light, close the cover properly, and check the beam against a wall.


Posted on 27 October 2026 by ScegliAuto


Related tutorials

How to turn on the front headlight lights of the 2006 Citroen C3
How to turn on the front headlight lights of the 2006 Citroen C3
Citroen C3 (2002-2009 / FN, FC) Today we will explain how to quickly and easily turn on the headlights on a 2006 Citroen C3 car. First, we get into the car and immediately turn on t…
How to Replace Dipped Beam Bulbs in a Citroen C3?
How to Replace Dipped Beam Bulbs in a Citroen C3?
Citroen C3 (2009-2016 / SC) In this tutorial, you will see how to replace the dipped beam bulbs in a Citroen C3, a very simple and quick operation. First, ensure the key is not …
How to replace the front headlight bulb of the Citroen C3
Citroen C3 (2009-2016 / SC) Today we will explain how to replace the headlight bulb of the Citroen C3. We open the front hood by lifting the opening lever located inside the cab…

How to reset the brake wear warning light on the Ford Transit?

To reset the brake wear warning light on the Ford Transit, first replace the worn brake pads with new replacement parts. Once the replacement is complete, disconnect the wear sensor connectors to allow them to reset. Then reconnect all the connectors to ensure they can read the new wear values. Therefore, enter the cabin and turn on the instrument panel to verify that the brake pad wear warning light has been reset.

Watch the video!


by ScegliAuto

More videos