Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear tailgate trim of the Mercedes B-Class

Model: Mercedes Classe B W246, MK 2 - Years 2011-2019
Part: Checks and maintenance

In this video we see how to remove the tailgate trim of the Mercedes Class B: we will need a small pointed screwdriver to remove the handle cover. With a long-nose pliers we will gently remove the clips inside. The next step is to gently insert a plastic spatula into the space that has been created, in order to start removing the trim; it is recommended to start from the sides and then move towards the center. We remove the electrical plug of the courtesy light, and then we continue, always with gentleness, to remove the plastics by levering in the spaces that have been created, and always starting from the sides. There will be clips and electrical wires, so we pay attention and always handle with care.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe B (2005-2011 / W245, MK 1) .. rear light and its bulbs on the Mercedes-Benz B-Class. First, open the boot lid and start by removing the cover found on the side, accessing the screws.. …
Mercedes Classe B (2005-2011 / W245, MK 1) .. replace the rear light bulb on a Mercedes-Benz B-Class, start by opening the tailgate. Then, remove the access panel by unscrewing the screws. Once the.. …
Mercedes Classe B (2005-2011 / W245, MK 1) .. light bulb of the rear light on the Mercedes B-Class. First, open the boot lid and start removing the side cover, which gives access to the inside of.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the Mercedes B-Class yaw sensor located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos