Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the spare wheel in a Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Wheel

The spare wheel of a Mercedes Vito vehicle is located underneath it, just below the rear trunk. In this video, we can see how to extract the wheel from the compartment where it is positioned. First, open the trunk and locate the accessories provided with the vehicle that are needed to release the wheel, you will find them placed in a compartment on the right side of the trunk. As shown in the video, use the screwdriver provided to remove the cover cap of the hole where you will insert the socket wrench; the hole in question will be under the rubber seal above the rear bumper. Then, insert the key and attach the extension that will allow you to rotate it and lower the wheel under the platform. Finally, detach the pin that allowed the wheel to descend and proceed to extract it from under the vehicle.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Wheel with the Spare on the Mercedes Vito
Guide to Replacing the Wheel with the Spare on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) This guide provides instructions on how to replace the wheel with the spare on the Mercedes Vito. First, open the rear tailgate and begin unscrewing …
Guide to Removing and Replacing the Spare Wheel on a Mercedes Vito
Guide to Removing and Replacing the Spare Wheel on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this guide, you will discover the main instructions on how to remove and replace the wheel with the spare on a Mercedes Vito. First, open the rear…
How to Remove the Spare Wheel from the Mercedes Vito
How to Remove the Spare Wheel from the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this video, you can see how to access the spare wheel in the Mercedes Vito by following simple and effective steps. First, you should know that th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos