Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Wheel

Mercedes Vito - Wheel

Mercedes Vito (2003-2013 / W639, MK 2)
Where is the spare wheel of the Mercedes Vito located?
On the Mercedes Vito, the spare wheel is positioned on the lower part of the vehicle, immediately under the floor at the rear cargo area: here you can find the …read all…
Posted on 8 April 2024 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
Where is the spare wheel located in the Mercedes Vito W447?
In this video we can see where the spare wheel of the Mercedes Vito W447 is located: we open the rear tailgate and remove the plastic trim, which is located …read all…
Posted on 4 March 2024 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
How to replace the wheel of the Mercedes Vito
First of all, we need to know the risks associated with a flat tire, in fact an aquaplaning could occur and a consequent road accident caused by a decrease in …read all…
Posted on 12 March 2024 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How to remove the spare wheel of the Mercedes Vito
In this video we can see how it is possible to put the spare wheel in the Mercedes Vito, following simple and effective steps. First we need to know that the …read all…
Posted on 12 March 2024 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos