Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Turbocharger

Mercedes Vito - Turbocharger

Turbocharger Mercedes Vito (2003-2013 / w 639, mk 2)

Mercedes Vito (2003-2013 / W639, MK 2)
How do you remove the turbo in the Mercedes Vito W639?
The video presented here shows how to proceed with the work mentioned in the subject in a Mercedes ML, but it does not differ from the Mercedes Vito W639, the …Read all…
Posted on 24 July 2024 by ScegliAuto
Airbag (1) Shocks (1) Car stereo (11) Anti-roll bar (1) Battery (15) Control arm (1) Glow plugs (1) Glove compartment (1) Key (7) Trunk lock (1) Timing belt (1) V-belt (1) Checks and maintenance (15) Dashboard (4) MAF sensor (1) Rear bench seat (2) Headlight (9) Tail light (2) Air filter (3) Cabin air filter (7) Diesel fuel filter (3) Grille (1) Light bulb (2) Headlight bulb (7) Tail light bulb (5) Antifreeze coolant (1) Handle (5) Power window motor (2) Engine oil (6) Clock (25) Door trim panel (10) Tires (1) Shift knob (4) Pump (1) Car door (6) Push button (1) Power window switch (1) Instrument cluster (2) Wheel (8) Fuse box (77) Seat (7) Suspension system (1) Side mirror (3) AdBlue warning light (8) Warning light – error code (11) (5) Tire pressure warning light (2) Service warning light (100) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Valve (1) EGR valve (1) Blower motor (3) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos