Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Timing belt

Mercedes Vito - Timing belt

Timing Belt Mercedes Vito (2003-2013 / w 639, mk 2)

Mercedes Vito (2003-2013 / W639, MK 2)
How to Replace the Timing Belt on a Mercedes Vito
How to remove the timing belt on a Mercedes Vito? First, lift the vehicle on a column lift, remove the front wheel, and use a screwdriver to take off the right …Read all…
Posted on 29 March 2026 by ScegliAuto
Airbag (1) Shocks (1) Car stereo (11) Anti-roll bar (1) Battery (15) Control arm (1) Glow plugs (1) Glove compartment (1) Key (7) Trunk lock (1) Timing belt (1) V-belt (1) Checks and maintenance (15) Dashboard (4) MAF sensor (1) Rear bench seat (2) Headlight (9) Tail light (2) Air filter (3) Cabin air filter (7) Diesel fuel filter (3) Grille (1) Light bulb (2) Headlight bulb (7) Tail light bulb (5) Antifreeze coolant (1) Handle (5) Power window motor (2) Engine oil (6) Clock (25) Door trim panel (10) Tires (1) Shift knob (4) Pump (1) Car door (6) Push button (1) Power window switch (1) Instrument cluster (2) Wheel (8) Fuse box (77) Seat (7) Suspension system (1) Side mirror (3) AdBlue warning light (9) Warning light – error code (11) (5) Tire pressure warning light (2) Service warning light (100) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Valve (1) EGR valve (1) Blower motor (3) Steering wheel (2)

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos