Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Cabin air filter

Mercedes Vito - Cabin air filter

Mercedes Vito (2003-2013 / W639, MK 2)
Replacement of the pollen filter of the Mercedes Vito
In order to have a constant flow of clean air in the cabin, we need to replace the pollen filter at the scheduled intervals as outlined in the maintenance …read all…
Posted on 4 May 2024 by ScegliAuto
Mercedes Vito (1995-2003 / W638, MK 1)
How to replace the cabin filter on a Mercedes Vito.
In this video tutorial, we can see how it's possible to replace the cabin filter on a Mercedes Vito by following some simple steps: the first thing we need to …read all…
Posted on 23 June 2023 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
How to replace the pollen filter on a Mercedes Vito.
In this video tutorial, we can see how it is possible to replace the pollen filter on a Mercedes Vito by following some simple steps: the first thing to do is …read all…
Posted on 5 June 2023 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
Cabin air filter replacement
To replace the passenger compartment air filter, the front hood must be opened and the intake grille located immediately under the windscreen on the driver's …read all…
Posted on 9 September 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos