Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Air Filter

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter, open the bonnet and access the intake grille located just below the windscreen on the driver's side; once you have located the filter housing, pull firmly on the cover to remove it and then extract the filter complete with its support frame (some models have screws securing this frame); at this point, ensure there are no dirt residues inside the filter housing and insert the new one (preferably activated charcoal) respecting the direction of the airflow.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2019 Mercedes Vito W447
Mercedes Vito (2014-2024 / MK 3, W447) In the following guide, you will find a description of the short yet important procedure to replace the cabin air filter in your 2019 Mercedes Vito W…
How to Replace the Engine Air Filter on the 2020 Mercedes Vito
How to Replace the Engine Air Filter on the 2020 Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) If you do not know how to replace the engine air filter on your third generation 2020 Mercedes Vito, do not worry as below you will find the steps to…
How do you replace the air filter of the Mercedes Vito?
How do you replace the air filter of the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) It will be possible to replace the air filter of the Mercedes Vito by opening the hood to gain access to the engine compartment: inside, you will be …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos