Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on the 2020 Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Air filter

If you do not know how to replace the engine air filter on your third generation 2020 Mercedes Vito, do not worry as below you will find the steps to follow to complete the operation smoothly and safely. First, purchase a new air filter that is fully compatible with your vehicle, then lift the bonnet and locate the box containing the filter. At this point, disconnect the sensor connector and use a T25 Torx spanner to unscrew all the screws from the cover. Finally, lift the cover and replace the old filter with the new one.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Mercedes Vito?
How do you replace the air filter of the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) It will be possible to replace the air filter of the Mercedes Vito by opening the hood to gain access to the engine compartment: inside, you will be …
How to Change the Battery of a Mercedes Vito
How to Change the Battery of a Mercedes Vito
Mercedes Vito (1995-2003 / W638, MK 1) In this guide, we will see the instructions that will allow us to remove and replace the battery of the Mercedes Vito. First, open the left front doo…
Where to Find the Engine Fuse Box on Mercedes Vito W447
Where to Find the Engine Fuse Box on Mercedes Vito W447
Mercedes Vito (2014-2024 / MK 3, W447) This guide will help you quickly locate the engine fuse box in your Mercedes Vito W447. Before starting, ensure the vehicle is parked safely and comp…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos