|
Do it yourself
| |||
| ||||
Mercedes C-Class W204 with OM 651 Engine Lacking Power
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, we see how the vehicle (a Mercedes C-Class W204 with OM 651 engine) has the issue that, despite the check engine light being off, it does not exceed 2500 RPM, and the 7G-Tronic transmission has jerks, with gears engaging at higher than normal RPMs. A diagnostic tool examination reveals error codes P245414 and P245328, which point directly to the differential pressure sensor of the DPF (also known as the exhaust gas pressure sensor). An analysis of the two codes indicates that the DPF differential pressure sensor has an electrical fault (which could be a broken wire, a corroded connector, or a burnt internal sensor) or is sending physically impossible values. If the sensor is faulty, the ECU cannot measure the clogging of the DPF and activates a protection strategy for the engine to avoid damaging the DPF. In this mode, power is limited, torque is cut, the transmission receives incorrect signals, but the check engine light remains off.
Posted on 20 June 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. to remove the power steering pump from a Mercedes C-Class W204. First, open the hood and remove the plastic engine cover, also taking off the.. …
Mercedes Classe C
(2007-2013 /
W204)
In this guide, you will learn how to safely locate the fuse box that contains all the fuses for your Mercedes-Benz C-Class W204. First, lift the hood…
Mercedes Classe C
(2007-2013 /
W204)
.. how to reset the check engine light on a Mercedes C-Class W204 in simple and quick steps. First, get inside the vehicle and connect your diagnostic.. …
Other guides you may be interested in
|
How to Open the Bonnet of a Toyota C-HR
To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |