Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : Third stop disassembly instructions

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Third brake light
Operation: Third stop disassembly instructions

The third step is located in the center of the rear window and fixed to the parcel shelf by means of a support plate which allows it to be easily disassembled: in fact, it is enough to pull it backwards like a drawer; in any case, if only the bulb needs to be replaced, simply remove the cap fixed with two plastic tabs and access the lamp holder and then change the bulb (T0 socket); on the other hand, if you want to disassemble the entire device, simply slide it to be able to remove it from the support plate and proceed in reverse to reposition it, taking care to insert the metal tab in its seat.


Posted on 1 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos