Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on the Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

Discover the steps to remove and replace the rear brake pads on the Mercedes C-Class. First, lift the vehicle and start by removing the rear wheel after engaging service mode to release the caliper piston.

Next, unscrew the bolts of the rear brake caliper, removing it from the rotor as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt.

Install the new original brake pads, reattach the caliper, and finally, reinstall the wheel.


Posted on 2 May 2026 by ScegliAuto


Related tutorials

Replacement of the rear brake pads for the Mercedes C-Class.
Replacement of the rear brake pads for the Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) .. replace the rear brake pads of the Mercedes C-Class. First, let's lift the vehicle and begin removing the rear wheel; then, we disconnect the electrical.. …
How to Replace the Rear Brake Pads on a Mercedes C-Class
How to Replace the Rear Brake Pads on a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. and replace the rear brake pads on a Mercedes C-Class. First, you will need to release the electric parking brake, putting the brakes in service mode;.. …
How to Replace the Rear Brake Pads on a Mercedes C-Class?
How to Replace the Rear Brake Pads on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos