Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel and use a 7mm wrench to loosen and remove the bolts of the brake caliper.

Remove the brake pad retaining clip by applying pressure on the sides with a screwdriver. Lift the brake caliper and pull out the old pads.

Install the new pads and reposition all previously removed parts, ensuring to tighten the clips properly.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Replacement of the rear brake pads for the Mercedes C-Class.
Replacement of the rear brake pads for the Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) .. replace the rear brake pads of the Mercedes C-Class. First, let's lift the vehicle and begin removing the rear wheel; then, we disconnect the electrical.. …
Procedure for replacing the rear brake pads of Mercedes cars.
Procedure for replacing the rear brake pads of Mercedes cars.
Mercedes Classe C (2014-2021 / W205) .. retract the rear brake pistons on a Mercedes C-Class: lift the car and secure it on jack stands, then release the electric parking brake by turning.. …
How to Replace the Rear Brake Pads on a Mercedes C-Class
How to Replace the Rear Brake Pads on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. To replace the rear brake pads on a Mercedes C-Class, safely lift the rear of the vehicle and remove the rear wheels. Locate the brake caliper and unscrew.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos