Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear brake pads for the Mercedes C-Class.

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

The instructions provided in this guide will show us how to disassemble and replace the rear brake pads of the Mercedes C-Class. First, let's lift the vehicle and begin removing the rear wheel; then, we disconnect the electrical connector located on the brake pads and unscrew the two fastening screws of the caliper located at the back, as shown in the video.

At this point, we remove the caliper and the old brake pads, cleaning the caliper of any residual dirt; we then install the new original brake pads, reassembling the caliper onto the disc.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Mercedes C-Class
How to Replace the Rear Brake Pads on a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. and replace the rear brake pads on a Mercedes C-Class. First, you will need to release the electric parking brake, putting the brakes in service mode;.. …
Replacing the Rear Brake Pads on the Mercedes C-Class
Replacing the Rear Brake Pads on the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. replace the rear brake pads on the Mercedes C-Class. First, lift the vehicle and start by removing the rear wheel after engaging service mode to release.. …
How to Replace the Rear Brake Pads on a Mercedes C-Class
How to Replace the Rear Brake Pads on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) To replace the rear brake pads on a Mercedes C-Class, safely lift the rear of the vehicle and remove the rear wheels. Locate the brake caliper and un…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos