Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the rear brake pads on a Mercedes C-Class. First, you will need to release the electric parking brake, putting the brakes in service mode; lift the vehicle and remove the wheel, then unscrew the bolts of the brake caliper to detach it from the rotor.

At this point, remove the old brake pads, cleaning the caliper and braking system of any residual dirt; install the new pads and the caliper onto the rotor, finally reassembling the wheel!


Posted on 11 August 2026 by ScegliAuto


Related tutorials

Replacement of the rear brake pads for the Mercedes C-Class.
Replacement of the rear brake pads for the Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) .. replace the rear brake pads of the Mercedes C-Class. First, let's lift the vehicle and begin removing the rear wheel; then, we disconnect the electrical.. …
Replacing the Rear Brake Pads on the Mercedes C-Class
Replacing the Rear Brake Pads on the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. replace the rear brake pads on the Mercedes C-Class. First, lift the vehicle and start by removing the rear wheel after engaging service mode to release.. …
How to Replace the Rear Brake Pads on a Mercedes C-Class?
How to Replace the Rear Brake Pads on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel.. …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos