Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the handbrake lever of the Mercedes C-Class.

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

Following these brief instructions, we will see how to disassemble and replace the handbrake lever of the Mercedes C-Class, as well as the E-Class. First, we get into the car and start pulling the handbrake lever; we find the two fixing screws on the back of it, which we will unscrew, as shown in the video.

At this point, we disconnect the electrical connector found on the back to remove and replace the lever with the new one, installing the original one; we make the connection and reassemble everything, following the video tutorial until the end!


Posted on 31 December 2024 by ScegliAuto


Related tutorials

How to Adjust the Parking Brake on a Mercedes C-Class?
How to Adjust the Parking Brake on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) To adjust the parking brake on a Mercedes C-Class, lift the vehicle so that the left rear wheel can be removed by loosening the mounting bolts. Once …
How to Adjust the Parking Brake on a Mercedes-Benz C-Class?
How to Adjust the Parking Brake on a Mercedes-Benz C-Class?
Mercedes Classe C (2000-2007 / W203) To adjust the parking brake on a Mercedes-Benz C-Class, fully lift the rear seat to access the components underneath. Locate a square panel that need…
How do you adjust the handbrake of the Mercedes C-Class?
How do you adjust the handbrake of the Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) The handbrake adjustment on the Mercedes C-Class can be done by loosening the screws that secure the rear seat bench to its housing: this way it will…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos