Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Mercedes C200

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

Follow the tutorial video available here to learn how to replace the brake pads on a Mercedes C200. Lift the vehicle and remove the tires one at a time, then disconnect the connector for the electronic brake wear sensor, unscrew the caliper retaining bolts, remove the worn pads, and clean the entire area, including the rotor and caliper.

Now proceed with the final part, which is to install the new pads in the brake caliper and reassemble everything, mounting them on the brake rotor and reinstalling the wheel.


Posted on 1 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Mercedes C-Class
How to Replace the Rear Brake Pads on a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) These brief and simple steps will show you how to remove and replace the rear brake pads on a Mercedes C-Class. First, you will need to release the e…
Replacing the Rear Brake Pads on the Mercedes C-Class
Replacing the Rear Brake Pads on the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Discover the steps to remove and replace the rear brake pads on the Mercedes C-Class. First, lift the vehicle and start by removing the rear wheel af…
Replacement of the rear brake pads for the Mercedes C-Class.
Replacement of the rear brake pads for the Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) The instructions provided in this guide will show us how to disassemble and replace the rear brake pads of the Mercedes C-Class. First, let's lift th…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos