Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Window on a Mercedes C-Class W204

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Rear window

In this video tutorial, you will learn how to remove the rear window on a Mercedes C-Class W204 by following these simple steps. First, get a thin metal wire or string to pass between the rear window and the seal; then make small movements at a time, being careful not to scratch the body, as shown in the video. At this point, once the window is detached, you can remove the glass using suction cups (or with the help of more people); then proceed with installing the new rear window!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear seats in the Mercedes C-Class w204?
How do you remove the rear seats in the Mercedes C-Class w204?
Mercedes Classe C (2007-2013 / W204) .. to specify, is carried out in a Mercedes C-Class w204, but it is very similar to the Mercedes C-Class w203, so the video available here can be used.. …
How to Reset the Window Regulator Motor on a Mercedes C-Class
How to Reset the Window Regulator Motor on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) In this guide, you will find instructions to reset the window regulator motor on a Mercedes C-Class in simple steps. First, get inside the vehicle an…
How to Remove the Rear Seats of the Mercedes C-Class W204
How to Remove the Rear Seats of the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. to remove the rear seats of the Mercedes C-Class W204 in simple steps. First, open the rear doors and lift the bench seat upward to detach and remove.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos