Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of the Mercedes C-Class W204

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Seat

In this video, you will see the instructions to remove the rear seats of the Mercedes C-Class W204 in simple steps. First, open the rear doors and lift the bench seat upward to detach and remove it. Then, use a T25 Torx screwdriver to remove all the screws located on the sides of the backrest. Next, remove the anchor nuts of the backrests using a 16 mm socket wrench. Finally, remove the last screws found at the back of the backrests, accessing them from the trunk.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Timing Chain on the Mercedes C-Class W204
Guide to Removing the Timing Chain on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. and replacing the timing chain on the Mercedes C-Class W204. First, open the hood and start by removing the upper cover; once you have removed the air.. …
Removing the Ignition Switch from a Mercedes C-Class W204
Removing the Ignition Switch from a Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) In this short video, you will see how to remove the ignition switch from a Mercedes C-Class (Mercedes W204). First, remove the chrome trim (if presen…
How to Remove the Headliner on the Mercedes C-Class SW W204
How to Remove the Headliner on the Mercedes C-Class SW W204
Mercedes Classe C (2007-2013 / W204) .. and assemble the headliner on the Mercedes C-Class W204 by following these simple steps. First, get inside the vehicle and start by removing the interior.. …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos