Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Mercedes Vito W638

Model: Mercedes Vito W638, MK 1 - Years 1995-2003
Part: Air filter

Let's see how to change the air filter on a Mercedes Vito W638: the filter is located in a black plastic box on the right side of the engine compartment; there is often a sensor on the air intake; disconnect it by pressing on the clip and gently pulling it away. The cover is secured with clips and, depending on the year of manufacture, also with two cross screws; then lift the cover, remove the old filter, clean the box from dust and residue, insert the new filter: the rubber gasket must adhere perfectly to the edge of the box. Reposition the cover of the box, if present screw back the screws, reconnect the sensor and close the hood.

Posted on 4 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter on the Mercedes Vito W638
How to replace the pollen filter on the Mercedes Vito W638
Mercedes Vito (1995-2003 / W638, MK 1) On the Mercedes Vito W638, access the pollen filter by moving the central glove compartment, which is a snap-in module; this is not the glove compart…
Where is the fuse box of the Mercedes Vito W638 located?
Where is the fuse box of the Mercedes Vito W638 located?
Mercedes Vito (1995-2003 / W638, MK 1) If you own a Mercedes Vito W638 and need access to the fuses but don't know where the box containing them is located, all you have to do is follow th…
Guide to Replace the Glow Plugs on the Mercedes Vito W638
Guide to Replace the Glow Plugs on the Mercedes Vito W638
Mercedes Vito (1995-2003 / W638, MK 1) This guide provides the main instructions for removing and replacing the glow plugs of the diesel engine on the Mercedes Vito W638. First, open the b…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos