Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter on the Mercedes Vito W638

Model: Mercedes Vito MK 1, W638 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Cabin air filter

See other generations:
Video tutorial

On the Mercedes Vito W638, access the pollen filter by moving the central glove compartment, which is a snap-in module; this is not the glove compartment located in front of the passenger. Release the glove compartment by pressing the side catches (there are no screws, just pull once the catches are out of their housings).

Pull the glove compartment towards the cabin and behind it, you will find the filter cover; unclip the cover and remove the old filter. Clean the container thoroughly of dust and debris and insert the new filter, paying attention to the installation direction.

Close the cover, snap the compartment back in, shut it, and you are done.


Posted on 1 June 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Mercedes Vito W638
How to replace the air filter of the Mercedes Vito W638
Mercedes Vito (1995-2003 / MK 1, W638) Let's see how to change the air filter on a Mercedes Vito W638: the filter is located in a black plastic box on the right side of the engine compartm…
Where is the fuse box of the Mercedes Vito W638 located?
Where is the fuse box of the Mercedes Vito W638 located?
Mercedes Vito (1995-2003 / MK 1, W638) If you own a Mercedes Vito W638 and need access to the fuses but don't know where the box containing them is located, all you have to do is follow th…
What is the purpose of the fuse diagram in the Mercedes Vito w638?
Mercedes Vito (1995-2003 / MK 1, W638) In the presentation available here, we see the Mercedes Vito w638, a multi-van or goods transport vehicle. The aforementioned vehicle is equipped wit…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos