Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : How to disassemble and replace the front bumper grille of the Mercedes Vito.

Mercedes Vito - Video tutorial

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Grille
Operation: How to disassemble and replace the front bumper grille of the Mercedes Vito.

Today we will discover the necessary procedure that will allow us to disassemble and replace the front bumper grille of the Mercedes Vito. First of all, we open the car's engine hood and start removing all the plastic clips located on the upper part of the bumper, using a thin plastic lever. Then, we detach the grille from the front bumper, as shown in the video. At this point, we install the new grille, of the correct type, properly securing it to the front bumper (making sure that the supports are in good condition), following the video tutorial until the end!


Posted on 9 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos