Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Mercedes M-Class

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Front bumper

This guide provides instructions for removing and replacing the front bumper of the Mercedes M-Class in simple steps. First, open the bonnet of the vehicle and start removing the plastics and grilles from the bumper. Unscrew the screws located inside, as well as those above and below the front bumper, as shown in the video. Disconnect the bumper from the sides, unclipping it until it is completely removed. If necessary, replace it, checking the condition of the supports and securing it properly to the bodywork.

Posted on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. open the tailgate of the boot on your Mercedes M-Class. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located.. …
How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. can start, open the tailgate of your Mercedes M-Class. Begin by unscrewing and removing all the bolts and screws securing the bumper, located around.. …
Removal and Replacement of the Front Bumper Grille on the Mercedes M-Class
Removal and Replacement of the Front Bumper Grille on the Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. the front bumper grille on the Mercedes M-Class. First, open the bonnet of the vehicle and start unscrewing the screws securing the grille, which.. …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos