Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Removal of the front grille of the Mercedes ML

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W166 - Years 2011-2018
Part: Grille
Operation: Removal of the front grille of the Mercedes ML

Let's see how to proceed in case we need to remove the front grille of the Mercedes ML to replace it if damaged or to change the look of the car. We open the hood of the engine compartment, using our fingers we apply pressure on the snap fasteners of the eyelid that runs from one headlight to the other and pull it towards us to detach it completely. Using plastic levers, we remove the four pressure pins located at the top of the grille, slightly push the bottom part of the grille to free it from the blocks, and finally remove it from its seat. To reassemble, proceed in reverse with the steps.


Posted on 3 January 2024 by ScegliAuto



Disassembly and replacement of the front bumper grille of the Mercedes M-Class.
Mercedes Classe M (2005-2011 / W164) Today we will discover the step-by-step instructions that will allow us to dismantle and replace the front bumper grille of the Mercedes M-Class. Fir
Front bumper removal instructions
Mercedes Classe M (1997-2005 / W163) To be able to remove the front bumper, start by opening the hood and unhooking the front grille, immediately in front of the radiator fans; then unsc
How to disassemble the front bumper in the Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) As we can see in this tutorial, removing the front bumper in the Mercedes M-Class is an extremely simple and fast operation. First of all we remove t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos