Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix Oil Leaks from the Engine Cover

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine

See other generations:
Video tutorial

You may experience oil leaks, which could be caused by an issue with the engine valve cover. There are screws that hold the cover to the engine head, usually four screws.

The engine (and its cover) are subject to significant temperature variations, which can deform the rocker cover, and the insufficient number of screws cannot contain this deformation. This design choice results in significant stress between the cover and the seal, which over time leads to a loss of sealing and consequently oil seepage.

One solution could be to tighten the screws to increase the pressure exerted by the seal.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Indicator on a Mercedes ML 270
How to Reset the Maintenance Indicator on a Mercedes ML 270
Mercedes Classe M (1997-2005 / W163) First, turn on the ignition of your vehicle to access the onboard computer. After starting the ignition, turn it off and restart it while pressing th…
Replacement of the Car Airbag Control Unit
Replacement of the Car Airbag Control Unit
Mercedes Classe M (1997-2005 / W163) The following guide shows how to address the airbag warning light issue. You may need to replace the control unit and fuses. In such cases, it may be…
How to reset the automatic gearbox in a Mercedes M-Class?
How to reset the automatic gearbox in a Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) In this tutorial, you will see how to reset the gearbox in a Mercedes M-Class, a very simple and quick operation to perform, for example, as a troubl…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos