Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heater Valve on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Valve

See other generations:
Video tutorial

In this video tutorial, you will see step-by-step instructions to remove and replace the heater valve on the Mercedes E-Class. First, open the hood of the vehicle and start removing the plastic cover located at the top of the engine bay by taking out the various clips; then disconnect the valve's hoses by loosening the metal clamps, allowing the fluid to drain into a container.

At this point, remove and replace the heater valve with the new one, reconnecting everything, and follow the video tutorial to the end!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve on a Mercedes E-Class?
How to Replace the EGR Valve on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. The EGR valve on the Mercedes E-Class is located inside the engine compartment. To locate it, open the hood: the device is found at the.. …
How to Replace the EGR Valve on a Mercedes E-Class?
How to Replace the EGR Valve on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To clean the EGR valve on a Mercedes E-Class, first remove it from its housing: open the hood to detach the protective cover on top of the engine.. …
How to Remove and Clean the EGR Valve on the Mercedes E-Class
How to Remove and Clean the EGR Valve on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. remove and clean the EGR valve on the Mercedes E-Class, following the instructions below. First, open the hood and start by removing the upper plastic.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos