Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Clean the EGR Valve on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: EGR valve

In this guide, you will learn how to remove and clean the EGR valve on the Mercedes E-Class, following the instructions below. First, open the hood and start by removing the upper plastic engine cover; then disconnect the electrical connector from the valve and remove its screws, as shown in the video. At this point, remove the EGR valve using appropriate degreasers for cleaning; if it is too dirty or damaged, proceed with replacement!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove EGR Valve on Mercedes E-Class
How to Remove EGR Valve on Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Removing a damaged EGR valve on a Mercedes E-Class? Let's go through the disassembly process. Raise the hood, locate the EGR valve to be removed... …
How to Clean the EGR Valve of the Mercedes E
How to Clean the EGR Valve of the Mercedes E
Mercedes Classe E (1995-2002 / W210) Lift the hood and secure it. Remove the engine soundproofing panel. Start by removing the retaining pins of the EGR valve as shown in the video. Once…
Removing the EGR Valve from the Mercedes E-Class
Removing the EGR Valve from the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the EGR valve on the Mercedes E-Class in simple steps. First, open the hood of the vehicle and locate the EGR valve next to the turbocharger.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos