Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the EGR Valve from the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: EGR valve

Today's main instructions will show you how to remove and replace the EGR valve on the Mercedes E-Class in simple steps. First, open the hood of the vehicle and locate the EGR valve next to the turbocharger housing; then, remove its mounting screws with a socket wrench, disconnecting the electrical connector of the sensor to take it out, as shown in the video. At this point, clean the valve of any deposits with appropriate degreasing products, or replace it with a new one if damaged.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove EGR Valve on Mercedes E-Class
How to Remove EGR Valve on Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Removing a damaged EGR valve on a Mercedes E-Class? Let's go through the disassembly process. Raise the hood, locate the EGR valve to be removed... …
How to Remove and Clean the EGR Valve on the Mercedes E-Class
How to Remove and Clean the EGR Valve on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. remove and clean the EGR valve on the Mercedes E-Class, following the instructions below. First, open the hood and start by removing the upper plastic.. …
How to Remove the EGR Valve from the Mercedes E-Class?
How to Remove the EGR Valve from the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To remove the EGR valve from the Mercedes E-Class, open the hood to access the components in the engine bay. On the right side, next to the engine.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos