Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Turbine efficiency check instructions

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Turbine
Operation: Turbine efficiency check instructions

If you hear a whistle coming from the engine compartment especially during acceleration phases, it is likely that the turbine is malfunctioning: if in fact, due to the wear of the support bushings, the impeller becomes jeopardized, then its rotation will be characterized by a hiss very similar to a whistle; to evaluate this play it is possible to disconnect the air delivery sleeve and try to move the impeller shaft up and down or right left; in the same way it is advisable to evaluate the free rotation of the shaft and the possible wear of the vanes.


Posted on 17 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos