Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Stabilizer Bushings

Model: Mercedes Classe S W140, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Bushings

See other generations:
Video tutorial

Lift the vehicle on a lift to a comfortable working height. Remove the front tire.

Turn the wheel outward. Using the appropriate wrenches, loosen the bolt that connects the stabilizer to the wheel.

Locate the bushing to be replaced and remove the two bolts that hold the plate in place. Once freed, slide it along the stabilizer until it comes off. Take the new bushing, insert it into the stabilizer, and slide it into its housing.

Repeat the same steps in reverse to secure the bushing and reassemble the removed parts. The maintenance operation shown in the images is performed on a Mercedes S-Class.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Remove the Bushings from a Mercedes S-Class Stabilizer Bar
How to Remove the Bushings from a Mercedes S-Class Stabilizer Bar
Mercedes Classe S (1999-2005 / MK 4, W220) In this video, see how to disassemble a stabilizer bar and replace the bushing on a Mercedes C-Class. Position your car on a column lift and raise it…
Removing Front Fender on Mercedes S-Class
Removing Front Fender on Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Loosen the bolts on the affected front wheel, lift the car with a jack (or two if you have them, lifting the vehicle with one jack on each side), and…
How to Replace the Battery in a Mercedes S-Class
How to Replace the Battery in a Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) To replace the battery in a Mercedes S-Class, remove the plastic cover located at the base of the windshield on the passenger side: you will need to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos