Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Removing the front fender Mercedes S-Class

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Front bumper
Operation: Removing the front fender Mercedes S-Class

Loosen the bolts of the affected front wheel, jack up the car (or two if you have them, jacking up the vehicle on each side) and unscrew them completely, then remove the wheel. Raise the hood and notice that laterally, inside the hood, are the bolts that secure the fender body from above. Unscrew them all, then go to the lower part and then to the wheel arch and unscrew the other bolts present and remove the various fixing clips. At this point remove the wheel arch. Remove the long plastic hook that holds the bumper to the fender. Unscrew the last screws present between the mudguard and the door.


Posted on 30 March 2024 by ScegliAuto



Where are the fuse boxes of the Mercedes S-Class located
Mercedes Classe S (1999-2005 / MK 4, W220) .. The fuse box of the Mercedes S-Class is located in the cheek of the dashboard, in contact with the passenger door. Another is located..
How to remove the exterior door handle on the Mercedes S-Class W221
Mercedes Classe S (2005-2013 / MK 5, W221) .. the external front door handle on the Mercedes S-Class W221, fifth series. First we open the front door and start by removing the side plastic cap; then..
How to replace the exterior mirror on the Mercedes S-Class W126
Mercedes Classe S (1979-1994 / MK 2, W126) .. the exterior rearview mirror on the Mercedes S-Class W126, first generation. First we open the front door of our car and start by removing the triangular..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos