Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bushings from a Mercedes S-Class Stabilizer Bar

Model: Mercedes Classe S MK 4, W220 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Anti-roll bar

See other generations:
Video tutorial

In this video, see how to disassemble a stabilizer bar and replace the bushing on a Mercedes C-Class. Position your car on a column lift and raise it to a comfortable height for work.

Remove the bolts with a socket wrench or air drill and take off the wheel. Next, start unscrewing the bolts of the control arm with a socket wrench.

Remove the bolts located under the plate that holds the stabilizer bar, then pull the bushing off the bar by hand. Install the new bushing onto the stabilizer bar, then begin to reinstall it. Mount the stabilizer bar with all the attached bolts, and tighten the support to the wheel hub. Finally, reinstall the wheel with the bolts.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Stabilizer Bushings
How to Replace the Front Stabilizer Bushings
Mercedes Classe S (1991-1998 / W140, MK 3) Lift the vehicle on a lift to a comfortable working height. Remove the front tire. Turn the wheel outward. Using the appropriate wrenches, loosen the…
Replacing the Rear Link
Replacing the Rear Link
Mercedes Classe S (1991-1998 / W140, MK 3) To replace the link (commonly known as the rear link), it is recommended to lift the vehicle on a lift and access the link that connects the stabiliz…
How to Remove the Front Headlight of a Mercedes S-Class
How to Remove the Front Headlight of a Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Want to remove the front headlight of a Mercedes S-Class? Let’s see how to proceed with the disassembly in the instructional video. Open the hood by …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos