Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Car suspension arm replacement

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 3, W140 - Years 1991-1998
Part: Arm
Operation: Car suspension arm replacement

The suspension arm of the car ensures the connection between the frame and the struts. It can deform as a result of an impact or undergo wear and, in that case, it will need to be replaced. A defect arm can lead to a dangerous loss of control of the vehicle. It is not a very complicated job and you can do it yourself. The guide shows how to change the arm. The car must be lifted with a jack. The hub cap has to be removed, removing the wheel and the bolts. With two wrenches the stabilizer link must be removed and it can be extracted without fear of breaking it. Once the joint has been removed, the suspension arm will be in front of us, fixed with screws and can be extracted.


Posted on 13 September 2023 by ScegliAuto



Replace the suspension arm
Mercedes Classe S (1991-1998 / MK 3, W140) A car's suspension arm can deform as a result of an impact or suffer wear. If so it will be imperative to replace it as a faulty arm can lead to the
Replacement of front shock absorbers
Mercedes Classe S (1991-1998 / MK 3, W140) The replacement of the front shock absorbers on the car model in question is very simple to perform as the shock absorber and the spring are not coax
Rear link replacement
Mercedes Classe S (1991-1998 / MK 3, W140) In order to replace the rod / strut (better known in the jargon as connecting rod), it is advisable to lift the car on the bridge and intercept the s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos