Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Shocks

Model: Mercedes Classe S W140, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Shocks

See other generations:
Video tutorial

Replacing the front shocks on this car model is straightforward since the shock absorber and spring are not co-axial, so you do not need special clamps to compress the spring. First, lift the vehicle on a hoist and remove the front wheel.

Then, remove the bolt that secures the lower eye of the shock absorber to the suspension arm and support the arm with a jack to slide out the bolt and lower it. Access the engine compartment, remove the plastic cover over the strut, and unscrew the shock absorber mounting nut. Install the new shock, tightening the nut immediately, then lift the vehicle again.

Use the jack to bring the suspension arm close to the shock absorber eye to insert and secure the bolt.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Remove the Shock Absorbers from Your Car
Remove the Shock Absorbers from Your Car
Mercedes Classe S (1991-1998 / W140, MK 3) When your car has traveled many miles, it is necessary to replace the shock absorbers that slow down the suspension. The replacement process is compl…
Where Are the Fuses Located on the Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) The fuses for the Mercedes S-Class are located inside dedicated fuse boxes present in the vehicle: this model has four fuse boxes. The first is locat…
Removing the Cabin Air Filter
Removing the Cabin Air Filter
Mercedes Classe S (1999-2005 / MK 4, W220) Replacing the cabin air filter is a task that all drivers should pay attention to. Its function is to keep the air clean inside the cabin and to cond…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos