Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mercedes Classe S - Shocks

Shocks Mercedes Classe S (1991-1998 / mk 3, w 140)

Mercedes Classe S (1991-1998 / MK 3, W140)
How to Replace a Shock Absorber
When your vehicle has traveled several miles, it is necessary to change the shock absorbers, which are responsible for damping the movements of the suspension. …Read all…
Posted on 4 March 2026 by ScegliAuto
Mercedes Classe S (1991-1998 / MK 3, W140)
Remove the Shock Absorbers from Your Car
When your car has traveled many miles, it is necessary to replace the shock absorbers that slow down the suspension. The replacement process is complex but can …Read all…
Posted on 4 March 2026 by ScegliAuto
Mercedes Classe S (1991-1998 / MK 3, W140)
Replacing Front Shocks
Replacing the front shocks on this car model is straightforward since the shock absorber and spring are not co-axial, so you do not need special clamps to …Read all…
Posted on 28 February 2026 by ScegliAuto
Cigarette lighter (1) Alternator (1) Shocks (3) Antenna (3) Air conditioning (1) Car stereo (4) Anti-roll bar (1) Roof rack bars (1) Battery (12) Bushings (1) Control arm (3) Transmission (3) Spark plugs (1) Glow plugs (1) Convertible top (2) Body (3) Key (14) Trunk lock (1) Air conditioner (6) Onboard computer (3) Checks and maintenance (11) Dashboard (1) Brake rotors (3) Side marker light (1) Headlight (3) Air filter (5) Cabin air filter (12) Diesel fuel filter (1) Oil filter (1) Window switch (1) Accessory kit (2) Headlight bulb (3) Interior dome light bulb (1) Handle (2) Engine (1) Starter motor (1) Engine oil (2) Clock (15) Door trim panel (3) Front bumper (1) Pump (2) Fuel pump (6) Car door (1) Power window switch (1) Instrument cluster (6) Fuse box (31) Seat (1) Crankshaft position sensor (2) Suspension system (1) Side mirror (7) Rearview mirror (2) AdBlue warning light (7) Warning light – error code (8) (12) Tire pressure warning light (1) Service warning light (32) Manufacturer emblem (1) Brake drums and shoes (1) Windshield wipers (3) Drivetrain (1) Side window (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos