Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Shock Absorbers from Your Car

Model: Mercedes Classe S W140, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Shocks

See other generations:
Video tutorial

When your car has traveled many miles, it is necessary to replace the shock absorbers that slow down the suspension. The replacement process is complex but can be done independently, without needing to visit your trusted mechanic.

Loosen the bolts and lift the car with a jack. Once all the bolts are removed, you can take off the wheel.

Next, open the hood and remove all the screws found above the shock absorber mount. Then, remove the two screws located on the spindle and the one positioned on the stabilizer, which runs parallel to the "affected" shock absorber.

The shock absorber will then come off easily.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Front Shocks
Replacing Front Shocks
Mercedes Classe S (1991-1998 / W140, MK 3) Replacing the front shocks on this car model is straightforward since the shock absorber and spring are not co-axial, so you do not need special clam…
How to Replace a Shock Absorber
How to Replace a Shock Absorber
Mercedes Classe S (1991-1998 / W140, MK 3) When your vehicle has traveled several miles, it is necessary to change the shock absorbers, which are responsible for damping the movements of the s…
How to Replace Your Car's Brake Rotors
How to Replace Your Car's Brake Rotors
Mercedes Classe S (1991-1998 / W140, MK 3) The following guide shows, step by step, how to best replace the brake rotors on your car. These are crucial for maintaining your vehicle's maximum e…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos