Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Rear link replacement

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 3, W140 - Years 1991-1998
Part: Arm
Operation: Rear link replacement

In order to replace the rod / strut (better known in the jargon as connecting rod), it is advisable to lift the car on the bridge and intercept the seat of the connecting rod that connects the stabilizer bar to the oscillating arm of the suspension (it is not necessary to remove the wheel rear); block the axis of the head with the hexagonal wrench and unscrew the relative fixing nut, both lower and upper, to complete the disassembly and remove the old connecting rod; then insert the new one and proceed backwards for installation taking care to tighten the fixing nuts correctly.


Posted on 2 September 2023 by ScegliAuto



Car suspension arm replacement
Mercedes Classe S (1991-1998 / MK 3, W140) The suspension arm of the car ensures the connection between the frame and the struts. It can deform as a result of an impact or undergo wear and, in
Replace the suspension arm
Mercedes Classe S (1991-1998 / MK 3, W140) A car's suspension arm can deform as a result of an impact or suffer wear. If so it will be imperative to replace it as a faulty arm can lead to the
Rear shoe replacement instructions
Mercedes Classe S (1991-1998 / MK 3, W140) To replace the rear shoes, proceed as follows: lift the car and remove the rear wheel and then unscrew the fixing pins of the caliper and its support

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos