Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Viano
    4. : How to disassemble the turbine on Mercedes Viano

Mercedes Viano - Video tutorial

Model: Mercedes Viano MK 1, W639 - Years 2003-2013
Part: Turbine
Operation: How to disassemble the turbine on Mercedes Viano

Let's see how to disassemble and replace the turbine on Mercedes Viano. Let's open the bonnet, lift it and put it in safety; remove the soundproofing panel from the engine compartment (if present), unscrew the locking pins of the turbine (located in the engine compartment) with a socket wrench, remove the valve from the engine housing and disconnect the various power supply terminals with a screwdriver or a nose pliers. After comparing the damaged valve with the new one: mount it on the engine block located in the compartment, tighten it well with the pins and connect the clamps (connect the various sleeves. Let's test the correct functioning of the car.


Posted on 13 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos