Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Valve Cover Gasket

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Valve

The valve cover is a metal cover located on top of the engine. It is connected to the engine by a rubber gasket. This gasket can become brittle and often break due to the high temperature of the engine. This can cause engine oil leaks, leading to serious damage. In this case, the valve cover gasket needs to be removed and replaced. Symptoms such as oil leaks, debris and oil on the valve cover, and the smell of oil all indicate that you should pay attention and perform this valve cover gasket replacement operation.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Disassembling the Cylinder Head and Gasket of the Mercedes E-Class
Guide to Disassembling the Cylinder Head and Gasket of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) Today, let's go over the main instructions for disassembling and replacing the cylinder head and its gasket on the Mercedes E-Class. First, open the …
Repairing Auxiliary Water Pump Leak
Repairing Auxiliary Water Pump Leak
Mercedes Classe E (1995-2002 / W210) The auxiliary water pump is generally electrically driven and circulates the heating water. Once you remove the four screws securing the top cap (whe…
Remove Right Front Headlight
Mercedes Classe E (1995-2002 / W210) Open the hood and ensure it is securely supported. Lift the seal covering the right side of the headlight (when facing the front) and unscrew the fas…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos