Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Front bumper

Mercedes Classe M - Front bumper

Mercedes Classe M (2005-2011 / W164)
Disassembly of the front bumper of the Mercedes ML
Today we discover the guide on how to disassemble and replace the front bumper of the Mercedes ML, in simple steps. First, lift the vehicle and start …read all…
Posted on 11 March 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to disassemble the front bumper in the Mercedes M-Class?
As we can see in this tutorial, removing the front bumper in the Mercedes M-Class is an extremely simple and fast operation. First of all we remove the small …read all…
Posted on 29 April 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Front bumper repair instructions
In the event of the bumper breaking with even the detachment of a portion, the repair becomes a real reconstruction and requires not only a certain familiarity …read all…
Posted on 15 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Front bumper removal instructions
To be able to remove the front bumper, start by opening the hood and unhooking the front grille, immediately in front of the radiator fans; then unscrew the …read all…
Posted on 15 August 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos