Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe M
  6. : Rear bumper

Mercedes Classe M - Rear bumper

Mercedes Classe M (1997-2005 / W163)
How do you remove the rear bumper of the Mercedes M-Class?

To remove the rear bumper of the Mercedes M-Class, you need to lever with an object in order to detach the three panels located halfway up the bumper: these …read all…
Posted on 17 May 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to remove the rear bumper of a Mercedes M-Class

Before starting, we will have to open the tailgate of the luggage compartment of our Mercedes M-Class. Let's start by unscrewing and removing the screws that …read all…
Posted on 21 February 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to remove the rear bumper of a Mercedes M-Class

Before we can start, we will have to open the tailgate of our Mercedes M-Class. Let's start by unscrewing and removing all the bolts and fixing screws of the …read all…
Posted on 21 January 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to remove the rear bumper on Mercedes Ml

Removal of the rear bumper of the Mercedes Ml? Let's see how it is removed from the rear of the vehicle. We open the tailgate, remove the cloth cover in the …read all…
Posted on 10 December 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Removing and replacing the bumper

In this video tutorial we will see how to remove and replace a bumper. Let's start by opening the hood and once you see where the screws to remove are located, …read all…
Posted on 22 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Rear bumper removal instructions

The removal of the rear bumper is very simple to carry out: in fact, it is only a question of removing four pins with the 10 mm wrench; to access the fixing …read all…
Posted on 23 August 2023 by ScegliAuto

Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos