Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Radiator

Mercedes Classe M - Radiator

Mercedes Classe M (1997-2005 / W163)
Remove the radiator on Mercedes Ml
Remove the radiator on a Mercedes Ml with attached pieces, let's see how. We lift the front hood, with a suitable socket wrench we go to disassemble the …read all…
Posted on 20 December 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Radiator disassembly instructions
Disassembling the radiator is not an immediate operation since there are many elements to be disassembled to get to the removal of the radiator itself; start …read all…
Posted on 13 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Replacing the viscous coupling of the radiator fan
The working principle of the viscous coupling is to drag the fan when the engine is very hot, to cool it with air conveyed at high speed. The fan also turns …read all…
Posted on 5 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Disassembly of the electric fan unit
To be able to disassemble the electric fan unit located right in front of the radiator, first open the front hood and unscrew the fixing pins of the fan …read all…
Posted on 1 September 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos