Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the intercooler radiator of the Mercedes M-Class 320 CDI.

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Radiator

In this guide, we will see the main instructions on how to disassemble and replace the intercooler radiator of the Mercedes Class M 320 CDI. First, we open the hood of the car and start unscrewing the fixing screws of the intercooler brackets that we find on the side; then we disconnect the various connecting pipes and rubber supports, as shown in the video. At this point, we replace and install the new intercooler, fixing it correctly and connecting the inlet and outlet air pipes (also replacing the rubber supports if worn).

Posted on 19 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Installing the Additional Control Unit
Guide to Installing the Additional Control Unit
Mercedes Classe M (1997-2005 / W163) The installation is not very complex; after removing the engine head cover, disconnect the cable shown in the video, then connect the connectors prov…
How to Replace the Battery in a Mercedes ML 320?
How to Replace the Battery in a Mercedes ML 320?
Mercedes Classe M (2005-2011 / W164) Replacing the battery in a Mercedes ML 320, as shown in this tutorial, is a very simple and quick task. First, ensure that the key is not in the igni…
Radiator Disassembly Instructions
Radiator Disassembly Instructions
Mercedes Classe M (1997-2005 / W163) Disassembling the radiator is not a straightforward task as there are many components to remove to reach the radiator itself; start by allowing the e…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos