Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Remove the radiator on Mercedes Ml

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Radiator
Operation: Remove the radiator on Mercedes Ml

Remove the radiator on a Mercedes Ml with attached pieces, let's see how. We lift the front hood, with a suitable socket wrench we go to disassemble the plastic cover above the bumper. We unscrew the screws that lock the radiator in the upper part, then we lift the car on a column bridge and loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers. Once free from screws and pipes we can extract the fan kit and immediately after the radiator from the engine compartment. We mount the cooling fans, clamps, pins and various pipes. We tighten the plastics and the front mask well with a socket wrench. We top up with the new liquid. Let's test how it works.


Posted on 20 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos