Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes ML 320?

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Battery

See other generations:
Video tutorial

Replacing the battery in a Mercedes ML 320, as shown in this tutorial, is a very simple and quick task. First, ensure that the key is not in the ignition for safety.

Next, move the passenger seat all the way forward and go to the rear seat on the same side. Remove the mat, open the access panel, and undo the two bolts of the mounting bracket using a 13 mm socket.

At this point, disconnect both terminals, starting with the negative, remove the battery, and fit the replacement by following the reverse procedure.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Disassembly of the intercooler radiator of the Mercedes M-Class 320 CDI.
Disassembly of the intercooler radiator of the Mercedes M-Class 320 CDI.
Mercedes Classe M (2005-2011 / W164) In this guide, we will see the main instructions on how to disassemble and replace the intercooler radiator of the Mercedes Class M 320 CDI. First, w…
How to Turn Off the Service Lights on a Mercedes ML 320
How to Turn Off the Service Lights on a Mercedes ML 320
Mercedes Classe M (2005-2011 / W164) Learn how to perform the service reset on a Mercedes ML 320. To reset the maintenance light: turn on the vehicle's instrument cluster, use the button…
How to Replace the SAM Module on a Mercedes ML 320
How to Replace the SAM Module on a Mercedes ML 320
Mercedes Classe M (2005-2011 / W164) The SAM (Signal Acquisition Module) is the brain of a specific area of your Mercedes ML, controlling the electrical functions of that area. On a W164…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos