Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Installing the Additional Control Unit

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Control unit

See other generations:
Video tutorial

The installation is not very complex; after removing the engine head cover, disconnect the cable shown in the video, then connect the connectors provided in the kit as shown in the guide and reposition the cover over the engine. Secure the control unit in a safe place, and the job is complete.

The illustrated procedure is valid for Mercedes models C, CLK, CLS, E, G, GL, MBC, ML, R, S 320 with 224 hp, E class, ML 280 CDI with 204 hp, and AMG C30 CDI with 213 hp. Most additional control units follow this simplified installation method, but it is advisable to inform yourself before purchasing.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacement of the Car Airbag Control Unit
Replacement of the Car Airbag Control Unit
Mercedes Classe M (1997-2005 / W163) The following guide shows how to address the airbag warning light issue. You may need to replace the control unit and fuses. In such cases, it may be…
How to deactivate the airbag light on the Mercedes M-Class
How to deactivate the airbag light on the Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) This brief guide will explain the procedure for resetting the malfunction indicator light of the airbag in the Mercedes M-Class; before performing th…
Driver Airbag Kit Replacement
Driver Airbag Kit Replacement
Mercedes Classe M (1997-2005 / W163) If the driver airbag (check the condition of the seatbelt pretensioner as well) has deployed after a collision, specifically the one located at the c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos