Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Central tunnel

Mercedes Classe M - Central tunnel

Mercedes Classe M (1997-2005 / W163)
How to disassemble the central tunnel of the Mercedes M-Class
Below we will see the steps useful for disassembling and replacing the central tunnel of the Mercedes M-Class. First of all, we get on board the passenger …read all…
Posted on 18 March 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Disassembly of the tunnel on Mercedes M-Class
Do the plastics of the central tunnel need to be replaced? Let's see how to disassemble the tunnel on Mercedes M-Class.We remove by levering the lining placed …read all…
Posted on 1 December 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Armrest disassembly instructions
To be able to disassemble the central tunnel, start by releasing the frame at the base of the gear lever, unscrew the two screws on the bottom of the storage …read all…
Posted on 19 August 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
Complete removal of the central tunnel
Open the drawer and remove the ashtray. Using a plastic tool to avoid damaging the bodywork, pry the base of the climate control controls and remove the panel, …read all…
Posted on 27 June 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos