Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mercedes Classe M - Key

Mercedes Classe M (2011-2018 / W166)
How to replace the battery of the key for the Mercedes M-Class W166.
If the smart remote control of your Mercedes M-Class W166 (year 2011-2018) is no longer working due to a dead battery and you are wondering how to replace it, …read all…
Posted on 31 July 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to change the key battery on Mercedes Benz ML
To easily replace the batteries in the key of your Mercedes Benz ML class at home, just follow the instructions in this short video. Unlike other Mercedes …read all…
Posted on 1 April 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
Mercedes Ml key battery replacement
How to remove the Mercedes M key to replace the battery? We disassemble the operating key and replace the battery inside. We take our ignition key and move the …read all…
Posted on 10 February 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to replace the battery in the remote control key of the Mercedes M-Class
How to replace the battery in the remote control key of the Mercedes M-Class? Let's see in this video in detail how to do it. We take our remote control key, …read all…
Posted on 15 November 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to replace the remote control battery of a Mercedes M-Class
How to change the key remote control battery of our Mercedes Ml-Class? Let's see in this video in detail how to do it. We take our ignition remote control and …read all…
Posted on 5 October 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos