Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Window lift button

Mercedes Classe M - Window lift button

Mercedes Classe M (2005-2011 / W164)
How do you replace the power window switch panel of the Mercedes M-Class?
In order to replace the power window switch panel of the Mercedes M-Class, it is necessary to completely detach the door panel from its housing: to remove the …read all…
Posted on 9 December 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to replace the button panel of the windows on a Mercedes M-Class
Before we can begin, we will have to go and sit in the driver's seat of our Mercedes M-Class. Let's start by lifting the central armrest, thus opening the …read all…
Posted on 30 March 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to replace the window control panel of a Mercedes M-Class
Before starting, we will have to sit in the driver's seat of our Mercedes M-Class. Let's start by lifting the central armrest, thus reaching the lower …read all…
Posted on 6 January 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
Remove the window control panel of a Mercedes Merdedes M Series
How to remove the window control panel placed in the panel of a Mercedes Merdedes M Series? Before starting the disassembly work, let's disconnect the battery …read all…
Posted on 7 November 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to replace the window control panel
The guide shows how to replace the window control panel of our car in case of breakdown or breakage, independently, without spending money on a mechanic. …read all…
Posted on 12 September 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos