Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Remove the window control panel of a Mercedes Merdedes M Series

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Window lift button
Operation: Remove the window control panel of a Mercedes Merdedes M Series

How to remove the window control panel placed in the panel of a Mercedes Merdedes M Series? Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a screwdriver we go to unscrew the tightening screws placed above the door panel. Once you have unscrewed all the fastening screws of the push button panel, pry it up and extract it out of the door panel. We disconnect the power supply cables with a screwdriver, unscrew the push-button panel and disconnect the power supply terminal. We replace the keypad with a new one.


Posted on 7 November 2023 by ScegliAuto



How to replace the window control panel
Mercedes Classe M (1997-2005 / W163) The guide shows how to replace the window control panel of our car in case of breakdown or breakage, independently, without spending money on a mecha
How to replace the window control panel of a Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) Before starting, we will have to sit in the driver's seat of our Mercedes M-Class. Let's start by lifting the central armrest, thus reaching the lowe
How do you replace the power window switch panel of the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) In order to replace the power window switch panel of the Mercedes M-Class, it is necessary to completely detach the door panel from its housing: to r

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos